• Español
  • English
  • Iniciar sesión
    o
    ¿Nuevo Usuario? Registrarse¿Has olvidado tu contraseña?
Logotipo del repositorioREPOSITORIO INSTITUCIONAL
  • Inicio
  • Comunidades
  • Navegar
  1. Inicio
  2. Examinar por materia

Examinando por Materia "lime"

Mostrando 1 - 2 de 2
Resultados por página
Opciones de ordenación
  • Cargando...
    Miniatura
    PublicaciónSólo datos
    INFLUENCIA DE LAS CARACTERÍSTICAS DEL RELLENO MINERAL EN LA RESISTENCIA DE UNA MEZCLA ASFÁLTICA
    (Fondo Editorial EIA - Universidad EIA, 2013-11-06) REYES, ÓSCAR JAVIER; RINCÓN, JHON FREDY
    El objetivo principal de esta investigación fue determinar el efecto en la resistencia a tracción indirecta de reemplazar el relleno mineral por cemento, cal y ceniza volante con diferentes porcentajes. El estudio se inició con la caracterización de los materiales (agregados, asfaltos, cal, cemento y ceniza volante), seguido de la determinación del porcentaje óptimo de asfalto mediante el método Marshall. Se seleccionaron para el estudio la granulometría MD10 y el asfalto con penetración 60/70, así mismo se sustituyó el relleno mineral en porcentajes de 0, 25, 50, 75 y 100. Se encontró que existe un incremento en la resistencia del 58 % al reemplazar el 100 % de relleno mineral por cal, del 22 % al sustituir el 50 % de relleno por ceniza volante y el 5 % al reemplazar el 75 % por cemento. Con respecto a la deformación de las probetas, para todos los porcentajes de sustitución de cal y cemento, la mezcla soporta mayor deformación para la carga máxima, mientras para el reemplazo de ceniza volante, sólo al 100 % de reemplazo aumenta la deformación con la carga máxima.Abstract: The main objective of the research was to determine the effect in the indirect tension strength when replacing mineral filler by cement, lime, and ash at different percentages. Materials were first characterized (aggregates, asphalt, lime, cement and fly ash). Then, using the Marshall method, was determined the optimum percentage of asphalt. Gradation m10 and asphalt with penetration 60/70 was chosen for the study, similarly, mineral filler was replaced on the percentages of 0, 25, 50, 75, 100. Strength was increased 58 % by substituting 100 % of mineral filler for lime, from 22 % to replace 50 % filler by fly ash, and 5 % by 75 % replacing cement, were the main findings of this study. In addition, it was found in relation to the deformation test, for all percentages of replacement of lime and cement, the mixture supports higher deformation to the maximum load. Whereas that, for replacement of fly ash, only 100 % replacement of the deformation increased with the maximum load.
  • Cargando...
    Miniatura
    PublicaciónSólo datos
    MEJORAMIENTO DE LA CALIDAD MICROBIOLÓGICA DE BIOSÓLIDOS GENERADOS EN PLANTAS DE TRATAMIENTO DE AGUAS RESIDUALES DOMÉSTICAS (MICROBIOLOGICAL QUALITY IMPROVEMENT OF BIOSOLIDS FROM DOMESTIC WASTEWATER TREATMENT PLANTS)
    (Fondo Editorial EIA - Universidad EIA, 2013-11-06) Torres, Patricia; Madera, Carlos; Silva, Jorge
    Uno de los principales problemas de calidad que presentan los biosólidos de plantas de tratamiento de aguas residuales domésticas –PTAR– es el contenido de microorganismos patógenos que los clasifica en muchos casos como Clase B con restricción para uso agrícola. Este estudio evaluó la estabilización alcalina de los biosólidos de la PTAR Cañaveralejo (Cali, Colombia) para mejorar su calidad microbiológica, empleando dos tipos de cal (hidratada y viva) en dosis entre 8 y 25 % y dos tipos de ceniza con dosis entre 8 y 40 % en unidades experimentales de 0,2 m2 con un tiempo de contacto de 13 días. Los resultados mostraron que con cal se logró reducción total de las variables de respuesta evaluadas (coliformes fecales, Salmonella sp y huevos de helmintos), mientras que el poder alcalinizante de las cenizas evaluadas fue insuficiente. El biosólido higienizado con cal presenta alto potencial de uso agrícola por su calidad microbiológica y por el contenido final de materia orgánica y nutrientes (N, P) que pueden beneficiar los suelos, pero es recomendable evaluar la optimización a escala piloto de la dosificación de cal y la aplicación del biosólido en diferentes tipos de suelos y cultivos para precisar los beneficios o medidas preventivas antes de la aplicación.Abstract: One of the main quality problems of biosolids from domestic wastewater treatment plants –WWTP– is the high concentration of pathogens, often classified as a class B, with restriction for use in agriculture. This study evaluated the alkali stabilization of biosolids from Cañaveralejo wastewater treatment plant (PTAR-C), located in Cali, Colombia, in order to improve their microbiological quality using two types of lime (quick and hydrated) with doses between 8 to 25 % and two types of ash with 8 to 40 % as doses, in experimental units 0,2 m2with 13 days of contact time. The results showed that both type of lime reached the total reduction of evaluated monitoring variables (faecal coliforms, Salmonella sp, helmints eggs) while the alkali power of ashes were lower. The obtained biosolids treated with lime have a high potential use in agriculture purposes for the good microbiological quality, and for the organic matter and nutrient content (N, P) that can generate benefit to the soil, but it is recommendable to evaluate at pilot scale the lime doses and application of biosolid in different soils types and crops in order to precise the benefits or prevent measurements before application of material in soil.
Universidad EIA Biblioteca CROAI

Sede Las Palmas:

Calle 23 AA Sur Nro. 5-200, Kilómetro 2+200 Variante al Aeropuerto José María Córdova, Envigado-Antioquia.
Código Postal: 055428 Tel: (604) 354 90 90
Tel-2: 3187754729 Fax: (574) 386 11 60

Cómo llegar
Sistema DSPACE 7 - Metabiblioteca | logo