Carmona Cadavid, Cindy VanessaCruz Montaña, Cristian Camilo2024-02-012024-02-012024https://repository.eia.edu.co/handle/11190/6399171 páginasRESUMEN: la primera etapa del proceso de termoformado consiste en calentar un material termoplástico hasta una temperatura especifica que varía con las propiedades físicas del polímero. El calentamiento del material debe realizarse de manera controlada utilizando hornos con sistemas de control que permitan regular eficientemente la temperatura. En este proyecto se diseñó y fabrico un horno eléctrico a escala con calentamiento por infrarrojos de cuarzo para calentar láminas de acrílico (PMMA) en un rango de temperatura de 100ºC a 170ºC, que es el rango de temperatura de termoformado para este polímero. Se implemento un control Proporcional Integral (PI) para regular la temperatura del horno, con un tiempo de estabilización de máximo de 35 minutos, un sobre impulso del 3%, y un error en estado estacionario de 0.7ºC. El horno logro calentar de manera controlada el material acrílico sin degradarlo, dejándolo en las condiciones óptimas de maleabilidad para un moldeo posteriorABSTRACT: the first stage of the thermoforming process consists of heating a thermoplastic material to a specific temperature that varies with the physical properties of the polymer. The heating of the material must be done in a controlled manner using ovens with control systems that allow the temperature to be regulated efficiently. In this project, a scaled electric oven with quartz infrared heating was designed and manufactured to heat acrylic sheets (PMMA) in a temperature range of 100ºc to 170ºc, which is the thermoforming temperature range for this polymer. A proportional integral (PI) control was implemented to regulate the oven temperature, with a maximum stabilization time of 35 minutes, an overshoot of 3%, and a steady-state error of 0.7ºc. The oven was able to heat the acrylic material in a controlled manner without degrading it, leaving it in optimal conditions of malleability for subsequent molding.application/pdfspaDerechos Reservados - Universidad EIA, 2024Horno eléctrico para el acondicionamiento térmico del material acrílico en la producción de lámparas ornamentales y cantoneras para avisos. Caso Creator Acrilicos S.A.S.Trabajo de grado - PregradoAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)info:eu-repo/semantics/openAccessAcrílico PMMAPMMA acrylicTemperatura de termoformadoCalentamiento por infrarrojosControlador de temperaturaThermoforming temperatureInfrared heatingTemperature controllerThermoplastic polymerhttp://purl.org/coar/access_right/c_abf2